 
To properly evaluate machine conditions, the oil samples submitted for analysis must be representative of the system from which they are taken.
For best results, follow our guidelines at the right.
|
OIL ANALYSIS CONSULTATION
Whether you are running an injection molding facility, nuclear power plant, paper mill,
surface mine, construction company, wind power farm or truck fleet Filtroil has over
25 years of experience educating customers on oil analysis. Our free oil consultation
services can help build a reliable pro-active approach to maintaining your equipment.
Oil analysis is the first step to identifying the current state of your equipment and Filtroil
can make professional recommendations helping you lower your maintenance costs for
the long term.
How to Take a Good Oil Sample
| STEP 1 |
The machine being sampled should be brought to normal operating temperature. Oil should be circulated, if appropriate. This will ensure that insoluble and semi-soluble contaminants are uniformly dispersed throughout the system. Samples taken from machines that have been inactive for long periods of time are not representative. |
| STEP 2 |
Each oil sample should always be taken in the same manner and from the same sampling point. |
| STEP 3 |
Do not sample a machine immediately after an oil change or after a large amount of make-up oil has been added. |
| STEP 4 |
Use a clean, dry container to draw the oil sample. Ship samples in the plastic bottles provided in the test package kit. |
|
