
SUITED FOR:
around-the-clock filtration,
filtration during machine
downtime or uptime,
filtration when main system
pressure is not an option,
bulk storage tanks
APPLICATIONS:
wide range of reservoir
capacities and special
applications
FULL SPEC SHEET
RELATED PRODUCTS:
Focus Portable Units
Hydraulic Filtration Units
Water/Glycol Filtration Units
TESTIMONIAL:
“The Filtroil BU-200EP was tested on a reservoir with Mobil DTE 25 over
a 16 hour period and the results were dramatic dropping the ISO code
from a 24/23/21 to a 17/15/12 reducing the particles at 4 micron by 99.6%.”
- Nani
Kella, Filtroil, August 16, 2009
Link to full testimonial
|
 PUMP MOTOR UNITS
Electric pump/motor units are designed and built for a wide range of reservoir capacities and special applications. A few examples: around the clock filtration, continuous filtering of bulk storage tanks, and machinery where it is inconvenient or the OEM discourages diverting oil from the pressure side of the system.
These units are ideal for equipment that needs to be filtered whether the machinery is running
or not. With the pump motor access, oil can be re-circulated continually for machinery that sits
idle for long periods of time. This type of installation is also beneficial when tapping into the
pressure line is not an option or preferred.
How to Change an Element How to Take a Good Oil Sample
| |
BU-100 EP |
BU-200 EP |
| Overall Dimensions |
18" x 9" x 18" |
18" x 9" x 18" |
| Net Weight |
55 lbs. |
59 lbs. |
| Dirt Holding Capacity |
1 lb. |
1.25 lbs. |
| Water Removing Capacity |
20 ozs. |
24 ozs. |
| Quantity of Oil in Machine |
Up to 325 gal. |
Up to 450 gal. |
| Oil (ISO) cleanliness |
16/14/11 or better |
16/14/11 or better |
| Filtering Accuracy |
0.1 micron |
0.1 micron |
| Flow Rate |
0.80 GPM |
0.80 GPM |
| Volts |
110/220-230 |
110/220-230 |
| Housing Burst Strength |
250-400 PSI |
250-400 PSI |
| Normal Viscosity |
9-180 c St @ 40°C |
9-180 c St @ 40°C |
| Inlet Diameter |
3/8" pipe nipple |
3/8" pipe nipple |
| Outlet Diameter |
3/8" pipe nipple |
3/8" pipe nipple |
| Safety Valve Pressure |
65 PSI |
65 PSI |
|